Beebeecraft Tutorials On How To Make Golden Wire Wrapped Necklace
search

Beebeecraft Tutorials On How To Make Golden Wire Wrapped Necklace

Updated 8/24/20

Beebeecraft Tutorials On How To Make Golden Wire Wrapped Necklace
Beebeecraft Tutorials On How To Make Golden Wire Wrapped Necklace

"Summary: Do you like golden wire wrapped necklace? How about a handmade wave shape necklace with pink gemstone decorated? In this tutorial, we are going to learn how to make a golden wire wrapped necklace with the guidance of Beebeecraft. Now you can get started with me! Materials and tools needed: 13x18mm pink gemstone cabochon 4mm white round pearl beads 1.5mm golden aluminum wire 0.3mm golden copper wire 5mm golden jump rings 3x2x0.6mm golden iron chain 12x6mm golden lobster clasp DIY jewelry pliers set"

NotesThere are five steps to get the total look of the necklace. Do you like the necklace pattern? Welcome to find more jewelry making supplies on Beebeecraft and share with me your craft project!


Project TypeMake a Project

Bead TypeWire

Time to CompleteIn an evening

Bead Technique UsedChainmail/Wirework

Bead Project TypeNecklace

intermediate

Materials List

  • 13x18mm pink gemstone cabochon
  • 4mm white round pearl beads
  • 1.5mm golden aluminum wire
  • 0.3mm golden copper wire
  • 5mm golden jump rings
  • 3x2x0.6mm golden iron chain
  • 12x6mm golden lobster clasp
  • DIY jewelry pliers set

Instructions

  1. take our your golden aluminum wire, and make a circle around the pink gemstone cabochon.

  2. stretch the wire and make two small loops with the help of the round nose pliers.

  3. bend the wires to form a big loop.

  4. use the copper wire to fix the wires. The wire setting is finished.

  5. use the copper wire to make loops around the aluminum wire.

  6. repeat the same steps to add the second layer.

  7. when you finish the front pattern, you are supposed to add the gemstone cabochon into it.

  8. thread across the back of the cabochon to make it stay in your wire setting.

  9. cut the copper wire and hide the end.

  10. use the aluminum wire to thread the component, and then make a cross.

  11. make big loops on both sides.

  12. wrap the aluminum wire to make the wave pattern.

  13. separately thread the pearl beads on the copper wire and wind the copper wire.

  14. repeat the same step to finish the other side.

  15. use the golden jump rings and connect it with a golden iron chain.

  16. connect the golden lobster clasp and you will finish the necklace.

Leave a Comment

Rate This Project

I have not made this yet so I cannot rate it.

Cancel Reply to Comment

Thanks for your comment. Don't forget to share!

Close

Report Inappropriate Comment

Are you sure you would like to report this comment? It will be flagged for our moderators to take action.

Thank you for taking the time to improve the content on our site.


Join our community of 5 million crafters!

Thank You for Signing Up!
There was an issue signing you up. Please check your email address, and try again.
Close Window