How to Make a Simple Wire Loop
By: Soft Flex Company
You can't become skilled at making jewelry without first mastering the basics. Start laying a strong foundation of knowledge and fundamental techniques by learning the most basic skill of How to Make a Simple Wire Loop. This is a crucial jewelry making technique that, while rudimentary, will be incredibly important in your jewelry-making endeavors. Master this simple skill before tackling any DIY jewelry projects, and you'll ensure success for yourself.
Project TypeLearn a Technique
Bead Technique UsedChainmail/Wirework
Instructions:
-
Use chain nose or flat nose pliers to form a right angle bend 1 inch from the end of the wire.
-
Use round nose pliers to hold the wire just after the bend. Roll the pliers toward the bend and stop at the bend. Do not roll past it.
-
Use your fingers to wrap the wire the rest of the way around the nose of the pliers. Trim the wire next to the bend.
Note: Open a simple loop just as you would a jump ring, by twisting it apart rather than pulling the ends apart.