Recycled Tile DIY Ring
search

Recycled Tile DIY Ring

2 Comments

Recycled Tile DIY Ring
Recycled Tile DIY Ring
This image courtesy of AllFreeJewelryMaking.com

Want a unique and out-of-the-box jewelry making idea? Check out this Recycled Tile DIY Ring that will definitely switch up your typical DIY ring style. This is a surprisingly easy DIY jewelry piece to make that you can make in a single night and wear out the next day. This jewelry video takes you through how to make this really cool recycled jewelry piece, so that you don't get lost along the way. Plus, this statement handmade ring will really get all of your friends gawking at your awesome jewelry making abilities!

Project TypeMake a Project

Bead TypeMiscellaneous

Time to CompleteUnder an hour

Bead Project TypeRing

Difficulty LevelBeginner

Materials List

  • Tile
  • Copper Tape
  • Sauter tool
  • Sauter iron
  • Saftery gloves and glasses
  • E6000 glue
  • Blank ring base

How to Make a Tile Ring

Instructions for a Tile DIY Ring

  1. Break the tile by wrapping your tile in a towel, go outside and put it on the ground and then hit your wrapped up tiile with a hammer until you recieve the desire size.

  2. Cut a piece of copper tape that is big enough to wrap around the edges of your tile. 

  3. Wrap the copper tape all around the edge of your tile.

  4. Press down the edges of your copper tape, to make sure it is as tightly bonded to the tile as you can.

  5. Coat your copper tape with flux.
     

  6. Put on your saftey goggles and glasses to begin sautering on low heat/flame. 

  7. Touch the sauter iron to the sauter. Glide the sauter all the way around the top of the tile. 

  8. Use your clamps to hold your ring while you sauter the sides.

  9. Using yoru E6000 glue, glue your ring base to the back of your tile ring.

Your Recently Viewed Projects

Leave a Comment

Rate

Cancel Reply to Comment

Thanks for your comment. Don't forget to share!

Definitely a unique piece. If you had a pair of tile nippers, you could easily clean up the edges, if you wanted. Since the soldering gun is already out, add a bail and make a necklace. This would really nice as a pendant, maybe with a bead dangle, and/or some wire wrapping too.

I absolutely love this idea! I think it is super unique and definitely not something I would have thought up on my own.

Close

Report Inappropriate Comment

Are you sure you would like to report this comment? It will be flagged for our moderators to take action.

Thank you for taking the time to improve the content on our site.

Join our community of 5 million crafters! Right now!

Thank You for Signing Up!
There was an issue signing you up. Please check your email address, and try again.

More from "Jewelry Videos"



Close Window